iBKS Config Tool Legacy APK
Phiên bản mới nhất
2.14 cho Windows
Ngày cập nhật
ngày 18 October năm 2016
Thông tin về Ứng Dụng
Phiên bản 2.14 (#26)
Ngày cập nhật ngày 18 October năm 2016
Kích thước APK 1.9 MB
Yêu cầu Android Android 4.4+ (KitKat)
Cung cấp bởi Accent Systems
Danh mục Ứng Dụng Công cụ miến phí
Ứng Dụng id com.accent_systems.ibks_config_tool_legacy
Ghi chú của tác giả Configure iBKS models with Firmware V2.0 or higher. READ DESCRIPTION!
Ảnh chụp màn hình
Click vào hình ảnh để xem kích thước đầy đủ
Mục lục
Mô tả
READ BEFORE DOWNLOAD: This application only works with the iBKS models with firmware version V2.0 or higher. Lower versions MAY NOT WORK with some devices.
iBKS Config Tool is an App which will allow you to scan and set up the iBeacon models iBKS101, iBKS102, iBKS105 and iBKSUSB with firmware v2.0 and above manufactured by Accent Advanced Systems SLU company.
The available features on the app are:
- Scan all the available iBeacon devices around and view the device MAC address and the advertising packet UUID, major, minor battery level and RSSI.
- Connect to iBeacon devices in configuration mode, view and modify the following characteristics: UUID, major, minor, the measured cal power at 1 m., advertisings interval, TX power, password and battery byte control.
IMPORTANT:
- App only available for devices with Bluetooth Smart LE v4.0 and Android 4.4 or newer.
- This app was specially designed to setup the iBeacon devices models iBKS101, iBKS102, iBKS105 and iBKSUSB with firmware v2.0 and above manufactured by Accent Advanced Systems SLU. Lower firmware versions may not work with some devices.
NOTE: App tested and working on devices: Samsung Galaxy Note 3, Galaxy S3, Galaxy S4, Galaxy S4 Mini, Galaxy S5, Nexus 5, Nexus 7, Motorola Moto G y OnePlus One, OnePlus Two, Honor7.
Connection issues for firmware below v2.0 on: Nexus devices, Motorola and Sony Xperia devices limited by Android OS.
For more information visit our website at http://accent-systems.com/
iBKS Config Tool is an App which will allow you to scan and set up the iBeacon models iBKS101, iBKS102, iBKS105 and iBKSUSB with firmware v2.0 and above manufactured by Accent Advanced Systems SLU company.
The available features on the app are:
- Scan all the available iBeacon devices around and view the device MAC address and the advertising packet UUID, major, minor battery level and RSSI.
- Connect to iBeacon devices in configuration mode, view and modify the following characteristics: UUID, major, minor, the measured cal power at 1 m., advertisings interval, TX power, password and battery byte control.
IMPORTANT:
- App only available for devices with Bluetooth Smart LE v4.0 and Android 4.4 or newer.
- This app was specially designed to setup the iBeacon devices models iBKS101, iBKS102, iBKS105 and iBKSUSB with firmware v2.0 and above manufactured by Accent Advanced Systems SLU. Lower firmware versions may not work with some devices.
NOTE: App tested and working on devices: Samsung Galaxy Note 3, Galaxy S3, Galaxy S4, Galaxy S4 Mini, Galaxy S5, Nexus 5, Nexus 7, Motorola Moto G y OnePlus One, OnePlus Two, Honor7.
Connection issues for firmware below v2.0 on: Nexus devices, Motorola and Sony Xperia devices limited by Android OS.
For more information visit our website at http://accent-systems.com/
Đánh giá và Bình luận
Xếp hạng: 2.0/5 · dựa trên Less than 100 đánh giá
(*) là bắt buộc
Các phiên bản trước
Tương tư như iBKS Config Tool Legacy
Xem thêm ứng dụng của Accent Systems
Top được tải về nhiều nhất
