Dr.OnOff APK
最新版本
1.26 for Windows
更新
2018年June09日
信息
版 1.26 (#1)
更新 2018年June09日
APK檔案大小 1 MB
Android 最低版本需求 Android 2.3+ (Gingerbread)
開發人員 Boris Schaedler
類別 工具 (應用)
應用 ID com.bsc101.actuator
開發者備註 Remote control for UniPi (EVOK), Raspi + PiFace Digital 2 & Pollin AVR-NET-IO
螢幕截圖圖片
點擊圖像以查看完整尺寸
最新異動
Dr.OnOff 1.26的新功能
v1.26:
- Support for UniPi (EVOK)
- Export and import device configurations
- Bugfixes
- Support for UniPi (EVOK)
- Export and import device configurations
- Bugfixes
內容描述
* Control the outputs and inputs of your UniPi (EVOK) device, Raspberry with PiFace Digital2 or Pollin AVR-NET-IO easily.
* UniPi (EVOK) support (e.g. UniPi Neuron): analog and digital outputs, relays, analog and digital inputs, sensors of type dev=temp (e.g. 1-wire sensors)
Features:
- Configure multiple profiles (Name, IP, Port)
- Name your outputs and inputs
- Outputs can behave as switch or push button
- Push button mode: define min and max switching times
- Read inputs manually or continously
- Different layouts for tablets und phones
- Phone: swipe left/right to change the view (inputs or outputs)
- Switch device by swiping up or down
- Change background and text colors for each device
- Password protection for all settings
Feedback goes to: dev@bsc101.eu
-----------
Raspberry Pi with PiFace Digital 2 how to:
http://www.bsc101.eu/dronoff/pifaceguide.html
1) Setup Raspberry Pi and PiFace Digital 2 (raspi-config -> enable SPI)
2) Install these python libs:
sudo apt-get install python{,3}-pifacedigitalio
sudo apt-get install python{,3}-pifacecommon
3) Download this python script: http://www.bsc101.eu/dronoff/dronoff3.py
4) Run the script dronoff3.py on the Raspberry: python3 dronoff3.py
5) Add a device in the app, use the IP of your Raspberry and port 50290 (you can change the port in the script), set Board to Raspberry Pi + PiFace Digital 2
If you have any questions, please contact: dev@bsc101.eu
Disclaimer:
The provider of this app is not responsible for any damages caused by using this app!
* UniPi (EVOK) support (e.g. UniPi Neuron): analog and digital outputs, relays, analog and digital inputs, sensors of type dev=temp (e.g. 1-wire sensors)
Features:
- Configure multiple profiles (Name, IP, Port)
- Name your outputs and inputs
- Outputs can behave as switch or push button
- Push button mode: define min and max switching times
- Read inputs manually or continously
- Different layouts for tablets und phones
- Phone: swipe left/right to change the view (inputs or outputs)
- Switch device by swiping up or down
- Change background and text colors for each device
- Password protection for all settings
Feedback goes to: dev@bsc101.eu
-----------
Raspberry Pi with PiFace Digital 2 how to:
http://www.bsc101.eu/dronoff/pifaceguide.html
1) Setup Raspberry Pi and PiFace Digital 2 (raspi-config -> enable SPI)
2) Install these python libs:
sudo apt-get install python{,3}-pifacedigitalio
sudo apt-get install python{,3}-pifacecommon
3) Download this python script: http://www.bsc101.eu/dronoff/dronoff3.py
4) Run the script dronoff3.py on the Raspberry: python3 dronoff3.py
5) Add a device in the app, use the IP of your Raspberry and port 50290 (you can change the port in the script), set Board to Raspberry Pi + PiFace Digital 2
If you have any questions, please contact: dev@bsc101.eu
Disclaimer:
The provider of this app is not responsible for any damages caused by using this app!
評分和評論
評分：5.0 / 5 · Less than 100 票
（*） 是必須的
之前的版本
類似內容
更多由「Boris Schaedler」提供的項目
下載次數最多的應用和遊戲
