iBKS Config Tool Legacy APK
En Son Sürüm
2.14 for Windows
Güncellendi
18 October 2016
Uygulama hakkında bilgi
Sürüm 2.14 (#26)
Güncellendi 18 October 2016
APK Boyutu 1.9 MB
Gereken Android sürümü Android 4.4+ (KitKat)
Sunan Accent Systems
Kategori Ücretsiz Araçlar Uygulama
Uygulama id com.accent_systems.ibks_config_tool_legacy
Geliştirici notları Configure iBKS models with Firmware V2.0 or higher. READ DESCRIPTION!
Ekran Görüntüsü Resmi
Tam boyutunu görmek için resmin üzerine tıklayın
İçindekiler Tablosu
Açıklama
READ BEFORE DOWNLOAD: This application only works with the iBKS models with firmware version V2.0 or higher. Lower versions MAY NOT WORK with some devices.
iBKS Config Tool is an App which will allow you to scan and set up the iBeacon models iBKS101, iBKS102, iBKS105 and iBKSUSB with firmware v2.0 and above manufactured by Accent Advanced Systems SLU company.
The available features on the app are:
- Scan all the available iBeacon devices around and view the device MAC address and the advertising packet UUID, major, minor battery level and RSSI.
- Connect to iBeacon devices in configuration mode, view and modify the following characteristics: UUID, major, minor, the measured cal power at 1 m., advertisings interval, TX power, password and battery byte control.
IMPORTANT:
- App only available for devices with Bluetooth Smart LE v4.0 and Android 4.4 or newer.
- This app was specially designed to setup the iBeacon devices models iBKS101, iBKS102, iBKS105 and iBKSUSB with firmware v2.0 and above manufactured by Accent Advanced Systems SLU. Lower firmware versions may not work with some devices.
NOTE: App tested and working on devices: Samsung Galaxy Note 3, Galaxy S3, Galaxy S4, Galaxy S4 Mini, Galaxy S5, Nexus 5, Nexus 7, Motorola Moto G y OnePlus One, OnePlus Two, Honor7.
Connection issues for firmware below v2.0 on: Nexus devices, Motorola and Sony Xperia devices limited by Android OS.
For more information visit our website at http://accent-systems.com/
iBKS Config Tool is an App which will allow you to scan and set up the iBeacon models iBKS101, iBKS102, iBKS105 and iBKSUSB with firmware v2.0 and above manufactured by Accent Advanced Systems SLU company.
The available features on the app are:
- Scan all the available iBeacon devices around and view the device MAC address and the advertising packet UUID, major, minor battery level and RSSI.
- Connect to iBeacon devices in configuration mode, view and modify the following characteristics: UUID, major, minor, the measured cal power at 1 m., advertisings interval, TX power, password and battery byte control.
IMPORTANT:
- App only available for devices with Bluetooth Smart LE v4.0 and Android 4.4 or newer.
- This app was specially designed to setup the iBeacon devices models iBKS101, iBKS102, iBKS105 and iBKSUSB with firmware v2.0 and above manufactured by Accent Advanced Systems SLU. Lower firmware versions may not work with some devices.
NOTE: App tested and working on devices: Samsung Galaxy Note 3, Galaxy S3, Galaxy S4, Galaxy S4 Mini, Galaxy S5, Nexus 5, Nexus 7, Motorola Moto G y OnePlus One, OnePlus Two, Honor7.
Connection issues for firmware below v2.0 on: Nexus devices, Motorola and Sony Xperia devices limited by Android OS.
For more information visit our website at http://accent-systems.com/
Reytingler ve İncelemeler
Kullanıcı oyu: 2.0 / 5 · Less than 100 oy
(*) gereklidir
Önceki sürümler
iBKS Config Tool Legacy benzer
Accent Systems'dan daha fazlası
En çok indirilen uygulamalar
