Strahlenstopp BERNIE TP-Link APK

- Anpassungen an Android 6.x

What the app does:

Measure [✔] wireless radiation exposure
[✔] Wi-night shutdown * for TP-Link wireless router
[✔] Reduces radiation exposure and energy consumption
[✔] TP-Link WLAN on / off via App Switcher
[✔] * Adding own switches and timers
[✔] switches control among others WLAN, Bluetooth, data sync
[✔] Automatic WLAN can Presence / Absence on / off *
[✔] * NFC: NFC devices back-to-keep-Fi on / off
[✔] App can manage multiple TP-Link router *

► What BERNIE beam stop, WLAN is not completely harmless?
WLAN transmits itself when not in use (eg. At night) 10 times per second a signal for announcing his willingness to connect. This pulsating signal is delivered with maximum transmission power. The recommendations, inter alia, the Federal Office for Radiation Protection loud that exposure to radio waves or radio frequency transmitters such as wireless as much as possible to reduce (source http://bit.ly/1LqNEGm).

► If there is a load in places permanent residence?
To measure an idea about the current, permanent wireless load on Fort suppression or at places permanent residence provides Bernie to a simple measuring instrument. This continuously determines the WLAN strengths of the individual frequencies in all scannable bands. Here, the WLAN strengths are not added over different frequencies, but only within a frequency and the maximum value of all frequency bands represents the estimated maximum total load at each location.

► The calculated exposure value is small, makes a night off but sense?
An overnight shutdown may still make sense to save energy costs and protect the environment. The permanent transmission of the wireless signal standby electricity costs, which can be saved.
Please also think to avoid unnecessary exposure in mind that even the phone itself is a source of radiation.

► How much can I save electricity costs by a night off?
The savings depend on the wireless router model and the duration of the night off. A cost saving of about 4 € -5 € in each router is realistic.

NFC: NFC sticker found on the Internet for small money. Any number of NFC stickers can be described with Bernie and a specific action to be executed when reading. Thus, an NFC example. Be fitted to the nightstand, turn off the radiation sources while reading the NFC evening and morning again. For example. Also in the entrance area can for example. NFC tags be useful to the WLAN when leaving / arriving to turn on / off.
Phone must be NFC enabled, so that the function is displayed in the app (eg. With Samsung Galaxy S3 / S4 / S5 / S6).

Compatibility:
BERNIE been tested with various routers TP-Link, these include the following models (each with the latest firmware as noted):
• TP-Link Archer C7 / AC1750v2 (Firmware V3.14.3)
• TP-Link Archer C8 (Firmware V3.16.30 + V3.17.0)
• TP-Link TL-N750 WDR4300 (Firmware V3.13.3)
• TP-Link TL-WR841N / ND V9 (Firmware V3.16.9)
Other currently available wireless router from TP-Link are usually equipped with the same router software and thus normally also compatible. Whether the on / off Wi-Fi on your TP-Link router with BERNIE succeed but needs to be tested individually. To this end, please always first play the newer firmware from the manufacturer's site, also above routers usually do not work with older firmware with BERNIE - whether newer firmware than the above still does not work, we can only after a test safely conclude (if necessary in case of problems with newer firmware contact us and initially re-downgrade to version above).

*): These features are not available completely or partially in the free version and require a one-time fee-based activation.

Note: The app uses Google Analytics to anonymous statistics Product Improvement raised.