Turning Time APK
App information
Version 12 (#1)
Updated 2018-12-26
APK Size 5.5 MB
Requires Android Android 2.3+ (Gingerbread)
Offered by MachinistApps
Category Free Tools App
App id appinventor.ai_mwoodhouse.TurningTime
Developer's notes Turn, Face, Drill, True Position, Surface Finish, 3 Point Circle and Tapping.
Screenshot
Click on the image to see full size
Table of contents
Latest updates
What's new in Turning Time 12
Send Drilling Part Program.
Editor's review
Download the latest Turning Time application, version 12, compatible with Windows 10/11 (using emulators such as Bluestacks), Android devices. This free Tools app is developed by MachinistApps and is easy to download and install.
Previous versions, including 12, are also available. If you need help or have any problems, please let us know.
Description
TURNING TIME: Calculates the number of passes and amount of time it takes to remove material when turning. It will also converts diameters, lengths, speeds and feeds from inch to metric and metric to inch. To use Turning Time enter the start diameter, finish diameter and length of cut. Next, enter your cutting parameters and press the Calculate button. Turning Time will convert your inch or metric data and display the number of passes, the time required to remove the material, amount of material removed, the removal rate, the maximum and minimum RPM and maximum IPM and MMPM feedrate. Also can set Max RPM (G50).
FACING TIME: Calculate the time it takes to face a part. Shows material removal rates, RPM G50 is reached. convert inch to metric and vise versa.
TRUE POSITION: Will calculate the true position of a hole and show the MMC.
Ra FINISH: Calculate the surface finish you will get with a known corner radius and feedrate/step over. Also shows the scallop height.
DRILL TIME: Calculate the time to drill a number of holes. Show the RPM and Feedrate in IPM. Show the drill point length. Also shows the amount of material removed and the material removal rate. Create and send Lathe Gcode part program.
3 POINT CIRCLE: If you know the XY position of 3 points the app will calculate the center of the circle and the diameter.
TAPPING: Calculate time to tap holes, RPM and Feed per Minute and per Rev.Inch and Metric. Enter the percent of thread and the app will tell you the drill size.
Ratings and Reviews
Rating: 5.0/5 based on Less than 100 reviews
(*) is required
Previous versions
Similar to Turning Time
More from MachinistApps
Top download apps
