Arduino RGB Bluetooth Function APK

Description:

Free Program Arduino code for RGB oArduino Bluetooth Function, Wiring Diagrams, photos and videos and Functional description and list of materials.

See the blogger:
http://sergioarduino.blogspot.com.br/p/led-rgb-arduino-bluetooth-1-esquema.html
http://sergioarduino.blogspot.com.br/

View on Youtube:
https://www.youtube.com/watch?v=XPkKCl5JC08&list=PL70c1gJPe5Br2QsPNIj1z3XoAjk9ysnq7


Walkthrough:
1 - Re-assemble the proto board as electric scheme;
2 - Connect the bluetooth (JY MCU) and Arduino module, see the LED is flashing;
3 - In Smartphone turn Bluetooth on and enter the application: Led RGB Arduino Bluetooth and press the Connect button;
4 - Note that the bluetooth module LED (JY MCU) and was blinking when connected to flashing and stay straight on;
5 - The devices are conetctados via bluetooth - bluetooth LED is lit directly.
6 - At this time all application buttons work and send data to the bluetooth module and the Arduino.
Application: Bluetooth Arduino RGB LED installed on the smartphone remotely controls the Arduino (via Bluetooth) with up and PWM channels as an example Arduino pins 9, 10 and 11.

What is RGB?
RGB stands for the color system formed by the initials of the colors in English Red, Green and Blue, which in Portuguese means, respectively, Red, Green and Blue.

Arduino RGB Bluetooth Function - How the application works?
The Arduino RGB Function Bluetooth application installed on Android Smartphone with communicating with the bluetooth which is connected to the serial (mySerial) pins 2 and 3 of the Arduino which in turn receives this data and makes control via PWM pins is done where dimerization ( 0 to 255) or specific functions of the RGB LED which is connected as an example Arduino pins 9, 10 and 11, as follows:

- ON button: Turns the LED lighting system in color;
- OFF Button: OFF / RESET; This button turns off the LED and reset the system settings by placing all of the variables in the default mode;
. Note1: When any function button (CA, FL, FA) is pressed it will execute the function in continuous mode until the OFF button is pressed and then the program runs until the end of the cycle and stops the execution of certain function;
. OBS2: IF YOU WISH TO STOP THE EXECUTION OF JOB THEN IMMEDIATELY PRESS RESET THE ARDUINO;
- Buttons R, G, B: Lighting the LED with the primary colors: Red, Green and Blue respectively;
- W Button: Lighting the LED color White;
- Colors predefined buttons: These buttons when precionados define the color of the LED, keeping the selected until another button is pressed color;
- Buttons pre-defined functions:
- AC: Automatic Change: Automatic change color;
- FL: Flash: Flash function the LED blinks rapidly alternating colors;
- FA: Fader Fader Function led the increases and decreases its intensity gradually alternating colors;

Heads up:
. Note1: When any function button (CA, FL, FA) is pressed it will execute the function in continuous mode until the OFF button is pressed and then the program runs until the end of the cycle and stops the execution of certain function;
. OBS2: IF YOU WISH TO STOP THE EXECUTION OF JOB THEN IMMEDIATELY PRESS RESET THE ARDUINO;

-Buttons (R +, R-, G+, G-, B + E B-): Definitions of color (16 million colors) and manual dimming touch the button; Using these buttons can adjust and set colors manually incrementing and decrementing RGB color or dimerization controlling its intensity (the adjustment is done by tapping the button);

Free Program Arduino code for the Arduino RGB Bluetooth Function, Wiring Diagrams, photos and videos and Functional description and list of materials.

See the blogger:
http://sergioarduino.blogspot.com.br/p/led-rgb-arduino-bluetooth-1-esquema.html
http://sergioarduino.blogspot.com.br/

View on Youtube: https://www.youtube.com/watch?v=XPkKCl5JC08&list=PL70c1gJPe5Br2QsPNIj1z3XoAjk9ysnq7