Home Automation 14 Chs Pro APK

Funcionamento do aplicativo apenas com dispositivos conectados via bluetooth;

Os dispositivos estão conetctados via bluetooth - led está aceso direto.
Neste momento todos os botões do aplicativo funcionam e enviam dados ao módulo bluetooth e ao Arduino.



Gratis Programa código para Home Automation 14 Chs Pro.
http://sergioarduino.blogspot.com.br/
http://sergioarduino.blogspot.com.br/p/arduino-bt-control-toggle.html

Description:

Operation of the application only with connected devices via bluetooth;

Walkthrough:

1 - Re-assemble the proto board as electric scheme;
2 - Connect the bluetooth (JY MCU) and Arduino module, see the LED is flashing;
3 - In Smartphone turn Bluetooth on and enter the application and press the Connect button;
4 - Note that the bluetooth module LED (JY MCU) and was blinking when connected to flashing and stay straight on;
5 - The devices are conetctados via bluetooth - Direct LED is lit.

6 - At this time all application buttons work and send data to the bluetooth module and the Arduino.


The Home Automation Chs 14 Pro application installed on Android Smartphone remotely controls the communication with Arduino via bluetooth 14 channels:

Analog and digital output port cofigurada: A0, A1, A2, A3, A4 and A5;
Digital port configured as output: D4, D5, D6, D7, D8, D9, D10 and D11;
Total 14 outputs.

Through these pins connect a board with 14 relays (sold on ebay or free market), which can control up to 14 devices handled residential power grid;

Controlling the drive (league and deslida) lamps, abatjours, fixtures, motors, pumps, solenoids, contactors, electric oven, appliances, etc..

If you prefer didactically, can use a plate or even a proto-board with 14 LEDs mounted to verify the activation of each of the 14 pins used as output.

Note this project the digital pins D0 and D1 are connected to the RX and TX of the Arduino board and the digital pins D2 and D3 are connected to the bluetooth module, the digital pin D13 is connected to the Arduino board led d13.

Use a smartphone with android to install this "apk.", In this example we used the Samsung Galaxy Tablet GT-P3100 Tab2 7.0 "with android version 4.0.



How it works:
The Home Automation Chs 14 Pro application installed on Android Smartphone with communicating with the bluetooth which is connected to the serial (mySerial) pin 2 and 3-RX-TX Arduino that receives data entities which in turn, interprets and makes the relay control (card drive relay) that is connected to the corresponding port on the Arduino digital.

Warning: When working with this application keep the screen always on (do not use sleep mode or sleep) because you may lose control of the device being powered.


This is all you need to know to build your program:

A0-ON-GREEN button - send: "A" character; A0-OFF-RED-send button: character "B";
A1-ON-GREEN button - send: character "C", A1-OFF-RED-send button: character "D";
A2-ON-GREEN button - send: character "E"; Button A2-OFF-RED-send: character "F";
A3-ON-GREEN button - send: character "G"; Button A3-OFF-RED-send: character "H";
A4-ON-GREEN button - send: character "I"; Button A4-OFF-RED-send: character "J";
A5-ON-GREEN button - send: character "K"; Button A5-OFF-RED-send: character "L";

D4-ON-GREEN button - send: character "M"; Button D4-OFF-RED-send: character "N";
D5-ON-GREEN button - send: character "O"; Button D5-OFF-RED-send: "P" character;
D6-ON-GREEN button - send: character "Q"; Button D6-OFF-RED-send: character "R";
D7-ON-GREEN button - send: character "S"; D7-OFF-RED-send button: character "T";

D8-ON-GREEN button - send: character "U"; Button D8-OFF-RED-send: character "V";
D9-ON-GREEN button - send: character "X"; D9-OFF-RED-send button: character "Y";
D10-ON-GREEN button - send: character "Z"; Button D10-OFF-RED-send: character "W";
D11-ON-GREEN button - send: character "a"; Button D11-OFF-RED-send: character "b";

Free program code for Home Automation 14 Chs Pro
http://sergioarduino.blogspot.com.br/
http://sergioarduino.blogspot.com.br/p/arduino-bt-control-toggle.html